How to install a gas detector? What are the considerations for installing a gas detector?

Gas detector is a commonly used gas concentration detection instrument, which is suitable for hazardous locations with flammable or toxic gases. It is widely used in petroleum, chemical, steel, coking and other fields. Gas detectors should be how to install it? The following specifically introduce the gas detector installation method.

Gas detector installation method 

Installing the gas detector in the area where there may be gas leakage. The installation of the gas detector must be firm, and the installation position is determined according to the proportion of the gas to be measured relative to the air. Less than air, gas detector should be installed 30 to 60 cm from the ceiling. Secure the detector to the wall with a φ8 expansion screw.

In order to properly use the detector and prevent its failure, do not install in the following locations:
a. Directly affected by steam and fumes

b. Air flow, ventilation fan, door, etc.

c. Where there are many vapors and water droplets (relative humidity: more than 90%)

d. Temperature below -40°C or above 70°C